081398831288 ^^^^ Jual Coating Thickness Tester CEM DT-157


Jual Coating Thickness Tester CEM DT-157


 FEATURES
  • Non-magnetic coatings (e.g. paint, zinc) on steel
  • Insulating coatings (e.g. paint, anodizing coatings) on no-ferrous metals
  • Non-ferrous metals coatings on insulating substrates
  • Easy MENU operation system
  • Statistics Display : AVG, MAX, MIN, S.DEV and Number of readings in work mode
  • Two measuring mode : CONTINUOUS and SINGLE mode
  • Two Working modes: DIRECT and GROUP
  • One Point Calibration, two point calibration and basic easy calibration
  • High and Low Alarm Settings
  • Bluetooth Interface
  • Meterbox iCTT app can be used for cloud storage

Sensor probeFERROUSNON-FERROUS
Working principleMagnetic inductionEddy current principle
Measuring range 0~2000µm0~2000µm
0~78.7mils0~78.7mils
Guaranteed  tolerance (of reading)0 ~ 1000 um (±2%±2um)0 ~ 1000 um (±2%±2um)
1000~ 2000 um1000~ 2000 um
(±3.5%)(±3.5%)
0~39.3mils0~39.3mils (±2%±0.08 mils)
(±2%±0.08 mils)
39.3~78.7mils (±3.5)39.3~78.7mils (±3.5)
Precision0~100um (0.1um)0~100um (0.1um)
100um~1000um (1um)100um~1000um (1um)
1000um~2000um (0.01mm)1000um~2000um (0.01mm)
0~10mils (0.01 mils)0~10mils (0.01 mils)
10~78.7mils (0.1 mils)10~78.7mils (0.1 mils)
Minimum curvature radius1.5mm3mm
Diameter of Minimum area7mm5mm
Minimum measurable thickness0.5mm0.3mm
Working temperature0°C~40°C (32°F~104°F)
Working relative humidity20%~90%

Related product you might see:

Share this product :

+ komentar + 1 komentar

13 Februari 2019 01.27

Sounds like a pretty useful tool!
You could also use Elcometer for an alternative

Posting Komentar

 
Support : Creating Website | Johny Template | Mas Template
Copyright © 2011. Toko Marga Setia - All Rights Reserved
Template Created by Creating Website Published by Mas Template
Proudly powered by Blogger