Vibration Meter Landtek VM-6360 with Software and RS232 Cable

- Versi lengkap dengan kabel data USB RS232, dan CD software 
Vibration Meter yang dilengkapi dengan software dan kabel untuk koneksi ke PC. Dimana hasil pengukuran bisa dianalisa, olah, simpan
Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery. Specifically designed for present measuring various mechanical vibration. So as to provide the data for the quality control, run time and equipment upkeep.
* In accordance with ISO 2954, used for periodic measurements, to detect out-of-balance, misalignment and other mechanical faults in rotating machines.
* Specially designed for easy on site vibration measurement of all rotating machinery for quality control,commissioning, and predictive maintenance purposes.
* Individual high quality ccelerometer for accurate and repeatable measurements.
* Wide frequency range (10Hz~10kHz) in acceleration mode.
* Optional headphones for use as electronic stethoscope.
* Bearing condition monitoring function.
* Use "USB data output" and "RS-232 data output" to connect with PC.
Sensor Piezoelectric Accelerometer
 Measuring Range
 Acceleration: 0.1~400 m/s²   0.3~1312 ft/s²   0.0~40 g   Equivalent Peak
 Velocity: 0.01~400 mm/s   0.004~16.0 inch/s   True RMS
 Displacement: 0.001~4.0 mm   0.04~160.0 mil   Equivalent Peak-peak
 Frequency Range Acceleration: 10 Hz ~ 1k Hz   10 Hz ~ 10k Hz
 Velocity: 10 Hz ~ 1k Hz
 Displacement: 10 Hz ~ 1k Hz
 Accuracy 5 % of Reading + 2 digits
 Metric / Imperial Conversion
 Analogue Output AC Output 0~2.0 V Peak Full Scale (Load Resistance: Above 10k)
 Max. Value Hold
 Power Off Manual Power Off or Auto Power Off
 Battery Indicator Low Battery Indicator
 Data Output USB, RS-232, Bluetooth
 Operating Conditions Temperature: 0~50 °C Humidity: <90 %RH
 Power Supply 4 x 1.5V AAA size (UM-4) Battery
 Dimensions 124 x 62x 30 mm
 Weight 120 g (Not Including Batteries)
Standard Accessories:
1. Main Unit
2. Magnetic Suction Seat
3. Piezoelectric Transducer
4. Probe (Cone)
5. Probe (Spherical)
6. Carrying Case
7. Manual Book
8. USB, RS-232 data cable with software
> Jangkauan frekuensi pengukuran yang besar.
> Dapat dihubungkan dengan komputer melalui interface RS232C.
> Mendukung sistem satuan metrik dan imperial.
> Alat yang sudah memenuhi standar ISO 2954.
> Alat yang memiliki desain untuk pengoperasian langsung di lapangan.
> Menggunakan akselerometer berkualitas tinggi.
> Dilengkapi fungsi peninjau kondisi bearing.
Spesifikasi Alat Pengukur Getaran VM6360 Vibration Meter Digital VM-6360 Alat Ukur Getaran
> Jangkauan pengukuran
> Kecepatan: 0,01 40 cm/detik2 (RMS)
> Percepatan: 0,1 400 m/detik
> Perpindahan: 0,001 4 mm
> Perputaran: 60 99.990 rpm
> Akurasi: 5% + 2 digit
> Tranduser: Akselerometer piezoelektrik
> Catu daya: 4x baterai AAA
> Dimensi: 124x62x30 mm
> Berat: 120 g (tanpa baterai)

Related product you might see:

Share this product :

Posting Komentar

Support : Creating Website | Johny Template | Mas Template
Copyright © 2011. Toko Marga Setia - All Rights Reserved
Template Created by Creating Website Published by Mas Template
Proudly powered by Blogger