- Vibration Meter dari pabrikan Landtek, memenuhi standard ISO2954
- Mengukur 3 parameter sekaligus: Displacement, Velocity, dan Acceleration
- Dapat koneksi ke komputer (kabel dan software opsional)
===
Small
size Vibration Tester, very easy to carry and light weight convenient
to use and operate. It is used for measuring periodic motion, check the
imbalance and deflecting of moving machinery. It is designed for
measuring of various mechanical vibration. Build with rugged
construction that allow long time usage.
Features:
Can display the parameters of displacement, Velocity, and Acceleration simultaneously.
In
accordance with ISO 2954, used for periodic measurements, to detect out
of balance, misalignment and other mechanical faults in rotating
machines.
Specially
designed for easy on site vibration measurement of all rotating
machinery for quality control, commissioning, and predictive maintenance
purposes.
Individual high quality accelerometer for accurate and repeatable measurements
Bearing condition monitoring function
Digital LCD display
Lightweight and easy to use
Wide frequency range (10Hz~10kHz) in acceleration mode
Automatic power shut off to conserve power.
AC output socket for headphones and recording (Headphone is optional and not included in the set)
Can
communicate with PC computer for statistics and printing by the
optional cable and the software for RS232C interface (not included in
the set)
Specifications:
Display: 4 digit LCD backlit
Sensor: Piezoelectric Transducer
Accuracy: 5% of reading + 2 digits
Measurement range:
Displacement: 0.001~4.000mm Equivalent Peak~Peak: 0.04~160.0 mil
Acceleration: 0.1~400.0m/s2 Equivalent Peak: 0.3~1312ft/s2; 0.0~40g
Velocity: 0.01~400.0mm/s True RMS: 0.004~16.00 inch/s
Frequency: 5Hz~1kHz
Frequency Range:
Displacement: 10Hz~1kHz
Acceleration: 10Hz~10kHz
Velocity: 10Hz~1kHz
Metric Imperial Conversion
Analogue Output: AC output 0~2.0V peak full scale (load resistance: above 10k)
With Max. value hold and low battery indication
PC interface: RS232C (cable and software not included in the set)
Power off: Manual off at any time or auto power off is enabled by user
Operating conditions:
Temperature: 0~50°C
Humidity: <90 %RH
Power Supply: 2 x 1.5V AA batteries
Size: 130 x 76 x 32mm
Weight: 340g (excluding battery)
Set Includes:
1 x Digital Vibration Meter
1 x Magnetic Suction Seat
1 x Piezoelectric Transducer
1 x Probe (Cone)
1 x Probe (Spherical)
1 x English Operation Manual
Carrying Case
Standard Factory Packaging
Posting Komentar